ARDEX FLOOR LEVEL Under-Tile Levelling and Smoothing Compound for Floors
Size (pack): 20kg
Coverage: Approximately 1.6kg ARDEX FLOOR LEVEL powder/m²/mm, e.g. one 20kg bag will cover approximately 6.4m2 at 2mm thickness.
ARDEX FLOOR LEVEL is a free flowing levelling compound designed for levelling and smoothing a wide range of sub-floor types including cement/sand screeds, gypsum screeds and concrete prior to applying floor tiles. Particularly useful when fixing large format floor tiles which require a very flat sub-floor. ARDEX FLOOR LEVEL contains high quality synthetic resins, special cements and selected fillers so that when mixed with water, a fluid, easily trowelled mortar is produced. The mixed mortar can be applied up to a maximum thickness of 10mm in one application but will still retain its free-flowing properties at a thickness of only 2mm to provide excellent coverage and material economy. The applied ARDEX FLOOR LEVEL dries to a virtually tension-free layer and can receive ceramic and natural stone tiles after only 4 hours at 20°C.
Latex based sub-floor levelling and smoothing compound with OUTSTANDING FLOW PROPERTIES.
• Walk on after only 2 1/2 hours
• Apply floorcoverings the next day
• Low odour, Ammonia free
• Ideal for use with all flooring adhesives
ARDITEX RS TRADE is a general purpose, latex sub-floor levelling and smoothing compound. It is designed for use on sub-floors such as concrete, cement and sand screeds, terrazzo and tiles etc. following application of the appropriate ARDEX primer. ARDITEX RS TRADE can be laid from 1.5mm up to 6mm thick. The rapid setting properties of ARDITEX RS TRADE mean that a 6mm layer will be ready to receive floorcoverings after only 24
hours at 20°C.
Size (pack): Powder 20kg, Bottles 4.1kg
Coverage: 2.1kg of mortar/m²/mm, e.g. one unit will cover approximately 4.6m² for a typical 2.5mm smoothing layer.
ARDEX P 4
Ready Mixed Rapid Drying Multi-Purpose Primer
ARDEX P 4 Primer is a ready mixed, rapid drying, solvent free primer.
The consistency of ARDEX P 4 Primer has been optimised so that dripping and splashes are virtually eliminated.
Size (pack): 8kg
Coverage: 8kg of undiluted ARDEX P 4 Primer is usually sufficient for priming at least 40m² per unit on most typical substrates.
Coverage depends on the texture and absorbency of the substrate, e.g. ceramic tiles. Porous surfaces will require more material.
ARDEX P 4 Primer can be used on internal and external walls, ceilings and floors. It can also be used prior to the installation of tile adhesives and floor-levelling compounds. Tiling onto existing tiling is facilitated by the excellent texture of the dry ARDEX P 4 Primer.
ARDEX P 4 Primer is a primer and bonding agent for absorbent and non-absorbent substrates such as:
• Concrete
• Cement and lime renders
• Sand/cement screeds
• Ceramic Tiles and slabs
• Terrazzo
• Dispersion based paints
• Traces of non-water soluble, flooring adhesives
• Dry screeds
• Levelling and smoothing compounds
ARDEX RAPIDLAY MEMBRANE
PVC Damp Proofing and Isolating Membrane
Packaging and Coverage
Roll width 1.45m
Roll length 25m
Roll covergae 36.25m²
Weight 58kg
Thickness 1.4mm
ARDEX RAPIDLAY MEMBRANE is a specially coated and patterned fibreglass reinforced sheet underlay designed to overcome the problems sometimes encountered in laying floorcoverings, particularly sheet vinyl flooring, over new or old sub-floors in domestic and light commercial areas. ARDEX RAPIDLAY MEMBRANE can be laid over a variety of surfaces, such as old sub-floors, vinyl flooring, ceramic tiling, sheet metal, sub-floors contaminated with oil or paint, or damp sub-floors. It can also be used over asphalt sub-floors.
Technical Data
