|
ARDEX WA
Size (pack): 4kg grey or white, 2kg
white
Coverage: as an adhesive, 4kg units sufficient for approx
1.4 sq m of tiles or 2.2 sq m of medium or small mosaics.
Coverage as a grout: 0.21kg/m² to 2.2kg/m²
depending on tile size and joint width - see literature.
White or grey epoxide adhesive and
grout for use in wet areas, including swimming pools,
easy to apply and clean off. For internal and external
applications. Use where high standards of hygiene and
cleanliness are required. Solvent free. Waterproof and
frost resistant. For wall and floor tile joints 2-12mm
wide.
ARDEX WA adhesive and grout is used
for specialised applications because of its high strength
and resistance. This means that ARDEX WA will withstand
aqueous salt solutions and alkalis, a number of mineral
and organic acids, organic solvents and solutions and
in particular cleaning agents. In fact ARDEX WA is eminently
suitable for abatoirs, dairies, commercial kitchens,
breweries, sugar factories, silos, stables, laboratories
and battery rooms.
ARDEX WA is classified as R2 T (improved reaction resin adhesive with additional characteristics and reduced slip) in accordance with BS EN 12004.
|
 |
 You
will need Acrobat reader to view the pdf files.
|
Technical Data