|
ARDEX R 10 P Polyurethane Coving
and Wall Render
Size (pack): 13.9kg
Coverage: A 13.9kg pack of ARDEX R 10 P Polyurethane
Coving and Wall Render will cover approximately 1.4m²
at 5mm thick.
Note: These figures are theoretical, due to wastage
and the variety and nature of substrates practical coverage
figures may be reduced.
High performance, polyurethane resin
wall and coving system, supplied as four components
in pre- measured packs for ease of on site mixing and
use. The cured system forms a tough, easily cleaned,
pigmented layer from a feather edge up to 12mm thick.
Specialist applied, polyurethane resin, wall and coving
finish, combining outstanding wearing properties with
high chemical resistance and decorative properties.
Ideally suited for aggressive areas where a seamless,
joint free finish is required and maximum cleanliness
is essential. Food processing and storage, abattoirs,
drinks production, dairies and general heavy duty plant
and traffic areas are just some of the environments
that can
benefit from this system.
| Colour choices
(guide only) |
|
|
|
|
|
|
|
| Green |
Grey |
Orange |
Red |
Cream |
Yellow |
 You
will need Acrobat reader to view the pdf files.
|
Technical Data