|
ARDEX EG 8 - Cement/Epoxy Hybrid Grout and Adhesive
Size (pack): 4kg units of ARDEX EG8 are supplied in pre-gauged
containers, the ARDEX powder is in the larger
container with room to mix in the ARDEX Liquid
Hardener from the smaller container.
Fixing coverage: 1.7kg/mm/m².
Grout coverage:This will depend upon the tile size, joint width and depth and the Grout
Coverage Figure, which for ARDEX EG 8 is 1.7. Highly textured tile surfaces
may require between 0.1 and 0.2kg/m² extra grout.
 ARDEX EG 8 grout combines the technical performance
properties of an epoxy based grout with the ease of
application associated with cement based grouts,
with no special tools required. Highly textured tiles
may benefit from the use of a hard rubber expoxy
squeegee.
 ARDEX EG 8 will prevent water penetrating into the cement based adhesive bed of glass tiles, stopping
unsightly moisture staining showing through. The hardened ARDEX EG8 mortar can withstand full loads after 2 days curing at normal temperatures and after 7 days it is resistant to aqueous salt solutions, chlorine water, commercial cleaning agents, alkalies as weIl as a wide range of dilute mineral acids.
 You
will need Acrobat reader to view the pdf files.
|
Technical Data